Tran ThienThanh, Le Hoang Minh, Nguyen Quoc Bao Cuong, Huynh Dinh Chuong, Nguyen Duy Thong, Vo Hoang Nguyen, Phan Long Ho, Chau Thanh Tai, Chau Van Tao
NIM A Available online 23 April 2020, 163995
Abstract:
Experimental data of Rayleigh to Compton scattering ratios depending on the effective atomic number of the fifteen powder samples in the range 10 < Z < 30 obtained at an energy of 59.54 keV using six well-known methods are presented in this article. In this study, a Si(Li) detector is placed at a scattering angle of 150 degrees to detect emitting signals from the interaction of incident gamma rays and powder samples. A new fitting procedure with the least squares method was used to fit the Compton peak using a Voigt function and the Rayleigh peak using a Gaussian function by Root software. The ten calibrating samples provided results that were in good agreement with the fitting procedure for all methods using linear functions. The estimated values of the Rayleigh to Compton scattering ratio using the effective atomic numbers were compared to the theoretical calculation. Furthermore, the best solution for the interpolated effective atomic number of the six methods was found and confirmed with the maximum relative deviation lower than 4% for five analysed samples.
More detail >>
